Author Topic: Coffee Deluxe  (Read 1111 times)

Offline Prophecy

  • Just Got Here
  • *
  • Posts: 6
    • Coffee Deluxe
    • Nemox Lux now Lido2
Coffee Deluxe
« on: December 31, 2017, 04:48:57 AM »
I was just given a Gaggia Coffee Deluxe that seems to be in extremely good shape except the group head drips essentially all the time. I read about the "idiot proof" auto fill steam valve but that doesn't seem to be what would cause an issue like this.

I haven't descaled the machine yet, so could it be that? I still need to read up on what the parts are and how this unit works but I saw some posts that look like some kind of spring valve that holds the water back when the pump isn't activated that may be full of scale.

Any ideas before the forum shuts down for good?? And also thanks to everyone for such a great resource and all of your time over the years!

Offline SusanJoM

  • Administrator
  • Grizzled GUG Veteran
  • *****
  • Posts: 2410
    • Classic
    • Compak K-10
Re: Coffee Deluxe
« Reply #1 on: December 31, 2017, 11:47:12 AM »
You are spot on:  the group valve that you are referring to is the most likely culprit,   It may well be that there is a bit of scale which is keeping it from closing completely. 

You might want to remove and clean that valve before you do a full descale of the machine, see if that fixes that problem.

Be aware that if the machine hasn't been descaled in a long time, descaling may break chunks of scale off and those chunks might block that valve.  You might need to do it a few times, and/or you might need to open the boiler and do a full manual descale just to get yourself in full control of a clean working machine.

Good luck.
“Not everything that can be counted counts, and not everything that counts can be counted.”
Attribution in Dispute



Reference Library

Owners Manuals, Parts Diagrams, Wiring Diagrams, and How-To-Do-Stuff Articles.


+-Recent Topics

The Forum is Shutting Down, closing as of Jan 1, 2018 by SusanJoM
December 31, 2017, 08:39:24 PM

Coffee Deluxe by SusanJoM
December 31, 2017, 11:47:12 AM

(Questions) - Homemade pressure gauge for adjusting pressure by SusanJoM
December 29, 2017, 03:19:19 PM

Nice OWC restoration at HB by D4F
December 27, 2017, 04:27:49 PM

Pump leaking from plastic by wjm
December 24, 2017, 05:37:39 PM

Using Thermoblock as preheater by jerryseabridge
December 24, 2017, 11:00:25 AM

Use OWC OEM portafilter for DIY pressure and/or temp gauge? by rcfitz86
December 22, 2017, 03:02:00 PM

Classic, solenoid or pump issue - help needed! by DG Classic
December 15, 2017, 11:32:58 AM

Gaggia Classic Solenoid Spring Question by SusanJoM
December 15, 2017, 10:59:51 AM

Dosing on Gaggia Classic Stainless Steel boiler by benm
December 13, 2017, 06:15:59 AM

Powered by EzPortal