Author Topic: (Questions) - Homemade pressure gauge for adjusting pressure  (Read 3284 times)

Offline doubleshot504

  • Getting the Hang of It
  • **
  • Posts: 16
    • Classic,
    • Baratza Precisco
(Questions) - Homemade pressure gauge for adjusting pressure
« on: December 29, 2017, 12:20:15 PM »
I found the old thread (below) listing parts, one of the links is no longer valid.   I also found pictures of a homemade pressure gauge in the library, but no detailed parts list.  Seems like its cheaper to build your own versus buying a premade gauge since they go for $30-$50 from what Ive seen.

Questions:
1.  Is the spout on the stock portafilter made to be disassembled? 
2.  If yes to above, is the thread type on the bottom of the stock portafilter 1/4" NPT?
3.  What is the valve and hose for?  Wouldnt turning off the pump divert the built up pressure to the 3 way valve?
3.  Does anyone have an updated parts list?

Old thread
http://www.gaggiausersgroup.com/index.php/topic,560.msg4842.html#msg4842

Library pictures
http://www.gaggiausersgroup.com/index.php?action=ezportal;sa=page;p=9
Fav drink: Iced Breve

Offline SusanJoM

  • Administrator
  • Grizzled GUG Veteran
  • *****
  • Posts: 2410
    • Classic
    • Compak K-10
Re: (Questions) - Homemade pressure gauge for adjusting pressure
« Reply #1 on: December 29, 2017, 01:54:49 PM »
1.  Some are molded in which case....no.
2.  3/8"
3.  So you can set for dynamic or static pressure
4.  Just take the picture to the hardware store
“Not everything that can be counted counts, and not everything that counts can be counted.”
Attribution in Dispute

Offline doubleshot504

  • Getting the Hang of It
  • **
  • Posts: 16
    • Classic,
    • Baratza Precisco
Re: (Questions) - Homemade pressure gauge for adjusting pressure
« Reply #2 on: December 29, 2017, 02:08:24 PM »
1.  Some are molded in which case....no.
2.  3/8"
3.  So you can set for dynamic or static pressure
4.  Just take the picture to the hardware store

Thanks for the quick response Susan.   Regarding dynamic or static pressure, when should 9 bars be set?  Meaning when the portafilter is pressured with no way of releasing the pressure?
Fav drink: Iced Breve

Offline SusanJoM

  • Administrator
  • Grizzled GUG Veteran
  • *****
  • Posts: 2410
    • Classic
    • Compak K-10
Re: (Questions) - Homemade pressure gauge for adjusting pressure
« Reply #3 on: December 29, 2017, 03:19:19 PM »
9 bar dynamic (using bleeder valve to simulate flow)
10 bar static (no flow)
“Not everything that can be counted counts, and not everything that counts can be counted.”
Attribution in Dispute

 

LIBRARIES

Reference Library

Owners Manuals, Parts Diagrams, Wiring Diagrams, and How-To-Do-Stuff Articles.

 

+-Recent Topics

The Forum is Shutting Down, closing as of Jan 1, 2018 by SusanJoM
December 31, 2017, 08:39:24 PM

Coffee Deluxe by SusanJoM
December 31, 2017, 11:47:12 AM

(Questions) - Homemade pressure gauge for adjusting pressure by SusanJoM
December 29, 2017, 03:19:19 PM

Nice OWC restoration at HB by D4F
December 27, 2017, 04:27:49 PM

Pump leaking from plastic by wjm
December 24, 2017, 05:37:39 PM

Using Thermoblock as preheater by jerryseabridge
December 24, 2017, 11:00:25 AM

Use OWC OEM portafilter for DIY pressure and/or temp gauge? by rcfitz86
December 22, 2017, 03:02:00 PM

Classic, solenoid or pump issue - help needed! by DG Classic
December 15, 2017, 11:32:58 AM

Gaggia Classic Solenoid Spring Question by SusanJoM
December 15, 2017, 10:59:51 AM

Dosing on Gaggia Classic Stainless Steel boiler by benm
December 13, 2017, 06:15:59 AM

Powered by EzPortal